Menu
A compressor can be perfectly sized and still struggle if the hose is wrong. A hose that is too narrow or too long chokes the air on its way to the tool, and the tool runs weak. This is how we pick hose for customers at our Little Island outlet.
Hose is sold by internal diameter (ID). A bigger bore carries more air with less pressure loss. As a rule of thumb:
Check the air consumption of your most demanding tool, then choose a bore that suits it. If in doubt, go one size up.
The longer the hose, the more pressure you lose along it. Use the shortest hose that does the job. For a long run to a workshop corner, a fixed pipe run with a short flexible hose at the end works better than one very long hose. See our guide to setting up a workshop air line.
The hose working pressure must be above your compressor's maximum pressure. Rubber air hose rated at 20 bar is a common choice for 8 to 10 bar compressors and holds up well to knocks and oil. Our rubber compressed air hose range is sold by the coil.
Make sure the fittings match your couplings and threads. Our couplings guide and BSPP vs BSPT guide will help you avoid ordering the wrong ones.
Yes, usually. A longer run loses more pressure, so a larger bore helps keep the air flowing to the tool.
No. Use hose that is rated for compressed air at your working pressure.
Browse our rubber air hose, hose reels and compressed air fittings, or call us on 021 435 5424.
At IAC Industrial Supplies, our mission is to be the go-to source for comprehensive industrial solutions. As a family-run business, we are dedicated to providing top-quality products and services to meet the diverse needs of our clients. Through a commitment to excellence, reliability, and customer satisfaction, we aim to be the trusted partner that empowers businesses to thrive in their industrial endeavors.
______________________________
Unit 705/707
Euro Business Park
Little Island
Cork
T45 NN60
021 435 5424